ADS-300 Anesthesia workstation with AVS-180 Ventilator + 3 Gas
ADS-300 configured with AVS-180 anesthesia ventilator and a 3-gas 5-tube high-accuracy rotameter configuration. Integrated with the ACS-1 gas-driven circle absorber using air as the driving gas.
AVS-180 is an advanced, user-friendly, microprocessor-based anesthesia ventilator suitable for adult and pediatric patients. AVS-180 has a 7” TFT touch screen display with volume and pressure graphs. AVS-180 can be operated in CMV, ACMV, SIMV, PLV, BAG and Standby modes
| PARAMETERS | AVS-180 |
| Mode of Operation | CMV, ACMV, SIMV, PLV, BAG & Standby. |
| Patient Type | Adult and Child [Selectable] |
| I: E Ratio | 4:1 to 1:4 |
| Plateau | 0 to 50% |
| Trigger | 0.5 to 5.0 cmH2O |
| Tidal Volume | 50 to 1500 ml. |
| Respiratory Rate | 1 to 40 Bpm |
| Ti | 0.3 to 8.0 Sec |
| Pi | 5 to 60 cmH2O |
| PEEP | – |
| Pressure Support | – |
| Ti max | – |
| Backup RR | – |
| Backup Mode | CMV |
| Monitoring Parameters | Tidal Volume, Minute Volume, RR, FIO2, Pi, P Mean, P Plat, PEEP Obtained. |
| Alarms | Pressure Low and High, RR Low and High, FIO2 Low and High, Active patient, Patient disconnected, Driving gas failure, Low battery indication, Minute Volume low-High. |
| Loop Types | Flow vs Pressure, Flow vs Volume & Volume vs Pressure [Selectable Any Two] |
| Graph Types | Flow , Pressure & Volume[Selectable Any Two] |
| Fresh Gas Decoupling | Enabled |
| Flow Sensor | External |
| Display | 7″ TFT with touch Screen. |
| Power Input | 20 W |
| Driving Gas | Air |
| Gas Input Pressure | 3~6 Bar (Pipeline) / 4-150Bar (Cylinder) |
| Battery Backup | 2 hours (Lithium-ion) |
| Flow Meter Type | 3 Gas(5 Tubes) |
